Make your own free website on
Return to  9/11 Issues homepage
A picture tour through ground zero - PictureTours2
This is my gut reaction to these pictures.  If I knew nothing else and had only been given these pictures, and the memory of the building that once stood on this site, I would conclude that WTC1 and WTC2 were blown up.
Source of photos:

I have a great deal of appreciation, respect, and admiration for "AP," the person who took these pictures.
It was a wonderful treasure you have provided to us.
These pictures provide the viewer with terrific evidence about what happened.

Your efforts are greatly appreciated.     Thanks!

There are three ways to get to the pictures, if you don't  click directly on the links I've given below each description.
I've listed them in ascending order, beginning with #30.

#30, #32, #36, #41, #43, #44, #49, #58, #60, #64
Note the steam rising.  The pic album is dated October 3, 2001, so I assume the pictures were taken before that.
#30, #31
Hey!  Is that part of a plane?  Who knows.  I'm talking about the thing that the backhoe looks like its driving up to, at the base of the hill, on the right side of those two beams.  (right above the sawhorse with a hat on one end and rope on the other.)
My goodness!  What a clean demolition site!  That ground almost looks clean enough to eat off of.  That's amazing, considering they're just cleaning up the trash to cart away.  (But, they need to be sure to get every bit of it!)
Wow!  A picture from the inside of the WTC area.  Just a few core columns survived in place.  Wow, notice the fine hill of stuff.  i.e. "Dust mound" from inside the borders of this  WTC tower.  I think it's WTC1.

    Hey, check out those guys in the yellow cage, hanging from a string supported by the crane.  (Follow the black string coming down from the top edge of the photo and you will see them.)   These guys are dangling over the site.  Why?  Maybe that's the only way they can look down into that region because of the heat?  Maybe these are the folks who came in the white van (shown in the next picture).

Check out the white van on the far right.  It's nice and white (clean) and has tinted windows so you can't see in.  This doesn't look like a construction-worker's van.  It even looks a bit in the way for that yellow scoop right behind it.
Check out those core columns in the lower left part of the picture, next to the transit.  The top one has weird holes in the end.
These guys look really clean!  Perhaps it's early in the morning.  Sun is shining from the southeast.

Ooooo... it looks like they have some core columns already loaded up, but maybe they are just stacked and waiting. 
(left edge of photo, in front of the red truck that is parked in front of the red crane)     [Click here for a zoomed-in view of the beams.]

#40, #41 
Obviously, no buckling was involved:
Check out those core columns stacked up at the bottom of the picture.  It looks like a bear chewed off the ends, except they're really flat on the ends!   Was this a special chain saw?  (as with  diamond-impregnated teeth?) It's amazing what straight cuts those are!   Man, they must have worked hard cutting those things up!  This one sure didn't come apart at the joint.  Those bolts and the weld jobs are still in place.  Obviously, they thought it was easier to saw through the beams than to attack the bolts.  How interesting.

I kind of wonder if that orange color on both beams, particularly the lower beam's top-right surface, is from excessive heat.   It looks like rust, but how could so much rust have developed in such a short time?  Also, there are shiny, metallic flakes, on and near the cut ends, along with burnt-looking particles.  What could have caused this?   Perhaps high-energy explosives? 

The top beam has a weird hole in the end (lower-left  corner).   There's also a hole in the other side, but it's hidden behind the transit in this picture.   I wonder what the transit is for.

  OK, here's a case for controlled demolition!  If the beams failed from being over stressed (like pancaking would cause), then why didn't they break at their weakest place???  At the joints, the beams are bolted and welded together.  Welding (which induces a thermal gradient and locks in residual stresses) leaves the material in that region a little weaker.  In addition, just the sudden change in geometry will cause stress concentrations.  [More is not always better!  For a constant loading, a beam of width "a" that abruptly widens and then abruptly narrows back to width "a" will have higher stress near those joints where the geometry changes than if it were a constant width "a" the entire length.]

  So, if these beams were over stressed (from "pancake" loading), I would expect them to fail in the neighborhood of the joints.  None of the beams in these pictures appear to have failed at a joint!  Note: it appears that many of the exterior columns did fail at the welded joints.  So, why didn't the core columns fail that way, too?    [Click here for a zoomed-in view of the beams.]

Notice the license plates on the back of the silver station wagon.  I can't quite tell, but it looks like a US-gov plate.  It's sure not a NY, CN, NJ, or PA regular plate.  Maybe it belongs to the suits (far right).  Interesting: the guy in the full suit looks like he's giving instructions, rather than listening to a guided tour.  Hmmm... I wonder why those windows on the front (right) face are missing.  Perhaps they were blown out?  I can't imagine a beam would sail through all of those windows without scraping any part of the window frame.  Also, the entire window is missing, unlike the left side of that building, which is in the shadow.  Those on the left side have holes broken out of the glass, but the edges remain.  I think that's what happens when junk hits it (vs. a blast of air).
I think we have a few core columns still in place!  Wow, they're collecting them as fast as they can.  Check out the stack of them in the lower right corner.  Hey, why do some of them have burnt marks?  Also, isn't it weird that they don't have any exterior columns stacked up?  Are they saving the easy ones for last?  And why are they in such a hurry to remove the core columns before the exterior columns?    [Click here for a zoomed-in view of the beams.]
Clearly the core columns were the first to be hauled away.  They seemed to be of prime interest, like they're in a race to get them.  Doesn't it make more sense to bring down those outer columns, first, before they fall on someone?  Also, they don't look as hot as those core columns.  Why not get the outer stuff, first, then work your way in to those core columns?  That would also give the core columns more cooling time.  That would be so much easier and SAFER!

Wow!  Check out that tall pipe that's just inside the tallest outer columns, just to the left of the corner.  It must be 10-stories tall!  If this building collapsed in on itself, why is this thing so straight?  It appears to be free standing.  I wonder what it is.  I thought the bathrooms were in the core area.  Could this be a mail tube?  :-)   Hmmm...  maybe it was a water pipe or sewer line from a floor higher up and just stabbed into the ground, there, like a javelin?

Some of these guys don't look like construction workers, like the guy in the red hat, in front of the flag on the red crane.  I wonder what's in his back pocket -- or belted around him.  Who wears a white shirt to a site like that and keeps it clean?  He may have a clipboard.  The guy in the green hat looks like a construction worker... and he has a cell phone as well as something in his back pocket.  That the expected appearance of someone who belongs there as well as the guy he's talking to.

Now, look at the remains of the in-place core columns.  Aren't those columns amazingly straight to have failed by  an overload?  Why don't they look crushed?  Why doesn't this space look overstuffed?  Near the highest point in that cluster of remaining core columns, there are long, narrow, tubes that look like they could be wiring conduit.  They are too straight to have had a building collapse on top of them.  One lone pipe is poking straight up, by itself, unsupported.  Gee... wouldn't you expect it to be wadded up like an accordion?

Why are they cut off straight, all at the same altitude.  Isn't this a statistical anomaly to have had all of them fail in the same way, at the same height?
I assume this is the elevator shaft area.  So, why isn't all the debris just packed in there hard?   So, if these columns are still standing, wouldn't you expect the bottom of these "hollow shafts" to have a huge amount of stuff pounded in them as if a huge hydraulic press mashed stuff in and then pounded on it?

That building on the left (WTC5 or WTC6) looks the way I'd expect a "collapsed" building to look.  It's got bent columns, the structure looks distorted (vertical columns are no longer vertical), and the "stuff" falling from it has a variety of sizes. The building didn't reduce to steel beams and micron-size powder.  I'll bet you could find a book case or file cabinet under that building.  And, ironically, that building did have a raging fire!  ;-)

Return to  9/11 Issues homepage


The 9/11 Files Topsites